For controlling and keeping track of perimeter security electric fences, the JVA Z14 is a single zone Energizer for electric fences. From modest household needs to fully integrated high-profile installations, it can satisfy all specifications. JVA Z14 Electric Fence Energizer is used for both residential and commercial security electric fences in Kenya.
Using the optional LCD keypad or Touch keypad, the Z14 may be programmed and controlled. For bigger sites that require many zones, it can also be networked with other Z Range Energizers to create a pulse-synchronized group.
JVA Z14 Electric Fence Energizer’s Features
High voltage output, safe but effective deterrent
Modes of high and low power
Space for a 12V 7.2aH backup battery and an integrated charger
Supports Fence wiring that is bi-polar or traditional
Short or open circuit alarms on the fence
LCD keypad or touch keypad for programming and controlling
several programmable options
Watch on a PC (using Perimeter Patrol software)
2 inputs for controls
two switched outputs of 12V DC (Siren and Strobe)
JVA Z14 Electric Fence Energizer as used in Kenya
The JVA Z14 energizer generates a very brief, safe, high-voltage pulse that is sent down the fence live wires once every second. The JVA Z14 then checks if the voltage is being maintained along the whole fence line by monitoring the voltage at the end of this live wire. The monitor will sound an alarm, alerting you to the issue, in the event of a voltage decrease brought on by shorting, cutting, or poor fence maintenance.
The JVA Z14 is a class apart when it comes to features and advantages at a cheap price because it was created and produced to fulfil the strictest international safety standards.
JVA Z14 LCD Display
The fence and return terminal voltage is displayed on the JVA Z14’s display. Return voltage is on the left, and feed voltage is on the right. The energizer is in typical mode, as shown by the arrows at the top of the display.
The left side is the positive return voltage and the right side is the negative return voltage when the device is set up for bi-polar operation.
When in programming mode, the LCD additionally displays the programming option and the current setting. This makes it simple to examine the settings for the programming options.